Archery on the whole is a very safe sport, with very little in the way of injuries when done safely. But unfortunately when injuries do occur, more often than not they are caused by an arrow that has been shot while damaged or incorrect for the bow.
The safety information here is integral for the safe use of all arrows. To reduce the risk of serious injury or death, you must read and understand all safety warnings included here.
If you are unsure of anything or have any questions in regards to your arrows please contact your local archery dealer for expert advice, or contact us directly.
NEVER SHOOT DAMAGED, OR THE WRONG SPINE ARROW
All arrows whether they be made from carbon, aluminium, fibreglass or traditional wood will eventually show signs of damage and wear due to impacting other arrows and/or a variety of objects such as targets, tree stumps, fences, rocks and even hard ground. So as a result of this it is vitally important that you inspect each arrow thoroughly before and after use. All types of arrows can break - especially if misused or abused.
Shooting a broken or damaged arrow could result in serious damage to your bow but far more important than that it could result in serious injury to you! Prior to every shot check for gouge marks, cracks, cuts or any other damage to your arrows.
It is also vitally important that you shoot the correct spine and weight arrow for you bow, as shooting the wrong spine or weight can also result in damage to you or the bow. If the arrow is too light it can have the same effect as a dry fire, damaging your bow. If the arrow is dangerously too weak it could explode on release.
PLEASE BE SAFE AND NEVER SHOOT A BROKEN OR DAMAGED ARROW
SAFETY RULES
Archery is a sport, that while being tremendous amounts of fun does require a competent level of skill. While out shooting you should treat those around you and your equipment with the utmost respect.
Please follow these Golden Rules to make sure that you and your arrows are safe:
Make sure the arrow is the correct Spine and Weight for your bow: Failing to do so could result in serious damage to you or the bow (see arrow chart below)
Visual Inspection: Check for gouges, scratches and impact fractures. If there are any visible signs of damage, discard the arrow.
Flexing the Arrow: Manually flex the arrow into an arc looking for any cracks or openings while listening for any cracking or popping noises. If you notice any of these, discard the arrow.
Twist the Arrow: Twist the arrow back and forth looking and feeling for any damage (Please be careful of carbon splinters) If you see or feel any damage, discard the arrow.
Fingernail Inspection: Check the arrow by taking your fingernail and moving it back and forth around circumference of the shaft to see if you can feel a crack or any other damages. If you do find a crack in your arrow, discard it immediately, as a hair-line crack is enough to cause the arrow to break the next time it is shot, putting you and those around you in danger.
Also look out for: Cracked, gouged or loose fitting nocks, impact marks, split shafts.
If you determine that your arrow is damaged DESTROY IT IMMEDIATELY! NEVER SHOOT A DAMAGED, BROKEN OR THE WRONG SPINE & WEIGHT ARROW!
Recurve bows - Use the left column. Select actual holding weight while at full draw, and cross-reference your arrow length to determine arrow spine. e.g. 36-40# weight at 28" arrow length = 600 spine arrows.
Compound bows - Use the right column. (If in doubt of cam type, use 'Hard Cam'). Select actual peak bow weight, and cross-reference your arrow length to determine arrow spine. e.g. Hard Cam, 45-50# weight at 29" arrow length = 500 spine arrows.
